Avenger 3

The Avenger 3 is the largest gantry in the standard ESAB product line. Designed to provide precision support for the largest process stations, it can span up to 32 feet, and carry any cutting or marking process.

Large, all-welded end trucks support a machined beam and an independent reinforced deck structure. Up to twelve process stations may be installed, including up to four plasma cutting stations. The Avenger 3 is also on the leading edge of machine technology, incorporating the industry’s most reliable digital servo amplifiers, AC brushless motors, precision planetary gearboxes, and linear rails and bearings.

When equipped with ESAB’s Vision T5 CNC, this machine easily becomes the most productive part of your cutting operation. The Avenger 3 is the perfect platform for plasma or oxy-fuel bevel cutting. It can accurately support up to two of ESAB’s Plasma Bevel stations, or two of ESAB’s Three Torch Oxy-Fuel Bevel stations.

The Avenger 3 can be configured with up to twelve cutting stations, including up to four plasma stations. Up to twelve powertracks can be installed to carry the station hoses and cables across Y-axis travel.  

Available processes on the Avenger 3 include oxy-fuel cutting, plasma cutting, plasma beveling, oxy-fuel beveling, plasma marking, punch marking, ink-jet marking, zinc marking, and pin-stamp marking. A rider’s platform is another option for the Avenger 3.

The AC brushless servo drive system, which is directly coupled to the planetary gearboxes, allows for the wide speed range of 2 - 1,000 ipm (50.8 - 25,400 mm/min).

Avenger 345
Maximum Table Width170"
4320 mm
5320 mm
6320 mm
7320 mm
8320 mm
9320 mm
10320 mm
Rail Gauge194.1"
4390 mm
5930 mm
6929 mm
7929 mm
8930 mm
9928 mm
10500 mm
Machine Width*236"
5994 mm
6985 mm
8001 mm
8991 mm
9982 mm
10998 mm
11577 mm
Work Table Height26" - 30"
660 - 762 mm
Machine  Height118"
2997 mm
Parking Area120"
3048 mm
Speed Range2 - 1000 ipm
50 - 25,400 mm/min
Power Requirement230/460/575 VAC, 50/60 Hz, 3-Phase, 30 Amp, Special input voltages are available upon request
Maximum Tool Configurations0 plasma / 12 oxy-fuel
1 plasma / 10 oxy-fuel
2 plasma / 8 oxy-fuel
4 plasma / 6 oxy-fuel
* Machine Width includes CNC, but does not include the cable chain and its tray, which can be mounted on the floor, or overhead.

  • 3 Axis Gantry with Rack-and-Pinion Drives
  • Dual Precision Linear Rail Y-Axis Guiding System
  • Heavy-Wall Reinforced Box Beam Design
  • Welded, Machined Trucks with long wheel base for added stability
  • Machined Mating Surfaces for high stiffness and accuracy
  • Digital AC Drive Amplifiers for years of maintenance free operation
  • AC Brushless Motors for smooth, accurate motion
  • Precision Planetary Gearboxes for accuracy and long life
  • Precision Linear Rail Drive Engagement
  • Maximum Machine Speed: 1000 ipm (25400 mm/min)
  • Positioning Accuracy: +/- .015”, Repeatability: +/- .005”
  • Cross Axis Powertrack Hose & Cable Carriers
  • Heavy-duty, precision machined floor mounted crane rail system with machined top and side surfaces
  • Rail features machined rack mounting groove for precise rack alignment
  • Precision drive rack mounted directly to machined surface
  • Fully adjustable mounting pads for adjusting height, level, straightness
  • Wide variety of cutting and marking process tools available

ESAB Welding and Cutting Products

411 South Ebenezer Rd.

Florence, SC

Telefon 843-664-4394
fax 843-664-4403
mail us.mgr.cutting(at)